| After-sales Service: | Available |
|---|---|
| Warranty: | The Life Span Should Be 50 Years. |
| Material: | HDPE |
| Kind: | Thermoplastics Pipes |
| Water Absorption: | ＜0.01% |
| Contraction Percentage: | ＜0.4% |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Wire mesh frame tube is a new type of tube with high density polyethylene (HDPE) as the matrix, and high performance HDPE modified adhesive resin is used to connect the steel wire frame with the inner and outer high density polyethylene closely together.Therefore, Wire mesh frame tube has the advantages of anti-corrosion, no scaling, smooth low resistance, heat preservation without wax, wear resistance, light weight and so on. It also breaks the pressure limit of PE pipe, with the highest pressure up to 3.5MPa.
The implementation standard is GB/T 32439-2015.
Transportation: no scratches, throwing, violent impact, oil and chemical pollution.
Construction: When heating, tube wall thickness ×9-10 seconds. The cooling time is three times the heating time. It should be putting into use after the pressure test is fine.
| Nominal diameter(Outer diameter)unit:mm | Nominal pressure | |||||
| 0.8MPa | 1.0MPa | 1.6MPa | 2.0MPa | 2.5MPa | 3.5MPa | |
| Thickness of wall(mm) | ||||||
| 50 | 5.0 | 5.5 | 6.0 | 6.5 | ||
| 63 | 6.0 | 6.0 | 6.5 | 7.0 | ||
| 75 | 6.0 | 6.5 | 7.0 | 7.5 | ||
| 90 | 6.5 | 7.0 | 7.5 | 8.0 | ||
| 110 | 6.0 | 7.0 | 7.5 | 8.0 | 8.5 | |
| 125 | 6.0 | 7.5 | 8.0 | 8.5 | 9.5 | |
| 140 | 6.0 | 8.0 | 8.5 | 9.5 | 10.5 | |
| 160 | 6.5 | 9.0 | 9.5 | 12.5 | 11.5 | |
| 200 | 7.0 | 9.5 | 10.5 | 12.5 | 13.0 | |
| 225 | 8.0 | 10.0 | 10.5 | 13.0 | ||
| 250 | 8.0 | 10.5 | 12.0 | 12.0 | 14.0 | |
| 315 | 9.5 | 12.0 | 13.0 | 13.0 | ||
| 355 | 10.0 | 12.5 | 14.0 | |||
| 400 | 10.5 | 13.0 | 15.0 | |||
| 450 | 11.5 | 14.0 | 16.0 | |||
| 500 | 12.5 | 16.0 | 18.0 | |||
| 560 | 17.0 | 20.0 | 21.0 | |||
| 630 | 20.0 | 22.0 | 24.0 | |||
| 710 | 23.0 | 26.0 | ||||
| 800 | 27.0 | 30.0 | ||||
Note:
1. This series of pipes are mainly used in fire pipes, high pressure water delivery in mines and other fields..
2. The nominal pressure refers to the maximum allowable working pressure of the pipe conveying water at 20ºC.
3. The weight of the HDPE material is calculated according to the average density of 0.95g/cm³, and the outer diameter and wall thickness are taken as the nominal value plus half of the limit deviation.
We has passed ISO9001:2015 quality management system certification, ISO14001:2015 environmental management system certification, ISO45001:2018 Occupational health and safety management system certification. In addition, we qualify the member cooperation unit with the State Grid Corporation of China and signed a long-term supply contract with the State Grid of China.
Wire mesh frame tube is a new type of tube with high density polyethylene (HDPE) as the matrix, and high performance HDPE modified adhesive resin is used to connect the steel wire frame with the inner and outer high density polyethylene closely together.Therefore, Wire mesh frame tube has the advantages of anti-corrosion, no scaling, smooth low resistance, heat preservation without wax, wear resistance, light weight and so on. It also breaks the pressure limit of PE pipe, with the highest pressure up to 3.5MPa.
Wire mesh frame tube is widely used in fire pipes, high pressure water delivery in mines and other fields.
The pipe with the same diameter of DN315mm or above can save 15%-20% of the material compared with the ordinary PE pipe, which is a energy-saving product vigorously developed recently.
Wire mesh frame tube connection construction is very simple, need only small capacitance of the welding machine can be connected, to improve the construction efficiency, speed up the construction schedule.
.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}