Chinese Factory Produced Mpp Electric Power Pipe in High Quality for The Use of Protecting Telecommunication Pipe

• After-sales Service: Available
• Warranty: Ordernary Use for 50 Years.
• Material: PP
• Kind: Thermoplastics Pipes
• Water Absorption: 0.12%~0.25%
• Contraction Percentage: 2.0%~5.0%
• Model NO.: MPP Electric Power Pipe
• Executive Standard: Dl/T802.7-2010
• Mop: Within 2.0 MPa
• Ash Content: Winthin 0.1%
• Diameter: 50mm-250mm
• Cross-Section Shape: Round
• Thickness: 5.0mm-15.0mm
• Ring Stiffness: Sn24-Sn32-Sn40
• Lifespan: Over 50 Years
• Temperature Resistance: -5ºC~70ºC
• Transport Package: Coated or Bare Pipe Transportation
• Specification: 5.8m, 6m, 12m or on customer requests.
• Trademark: Jinhong
• Origin: Shandong, China
• HS Code: 3917390000
• Production Capacity: 500, 000 Tons /Year

Product Description

Product Description

MPP pipe, which is short for Modified Polypropylene, is a new type of composite pipe made of modified polypropylene.It is made of special formula and processing technology. It has the advantages of higher strength, better high temperature resistance, easier to install and lower cost than the general PE pipe . It is suitable for the depth of 2-18 meters.
Mpp power pipe is suitable for more than 10KV high voltage transmission wire and cable pipe, plastic pipe. It is also widely used in the area of Telecommunication pipe, Gas pipe, Water supply pipe and Heating pipe.

The implementation standard is DL/T802.7-2010.

Transportation: no scratches, throwing, violent impact, oil and chemical pollution.

 

 

Product Parameters

MPP Cable Conduit Pipe's Parameter Datas
Norminal Lenght (mm),Ring Stiffness (3%) Grade (Normal Temperature)
Nominal diameter (mm)	Norminal Wall Thickness (mm)
	SN24	SN32	SN40
100	6	8	10
125	8	10	12
150	10	12	14
175	12	14	16
200	14	16	18
225	16	18	20
250	18	20	22

Note:
1. This series of pipes are mainly used in MPP electric power pipe. The nominal pressure refers to the maximum allowable working pressure of the pipe conveying water at 20ºC.
2. The weight of the above table is calculated according to the average density of 0.95g/cm³, and the outer diameter and wall thickness are taken as the nominal value plus half of the limit deviation.

Certifications

We has passed ISO9001:2015 quality management system certification, ISO14001:2015 environmental management system certification, ISO45001:2018 Occupational health and safety management system certification. In addition, we qualify the member cooperation unit with the State Grid Corporation of China and signed a long-term supply contract with the State Grid of China.

Production features

1. MPP pipe has excellent electrical insulation.
2. MPP pipe has higher thermal deformation temperature and low temperature impact performance.
3. MPP pipe has higher tensile and compression resistance than HDPE.
4. MPP pipe is light, smooth, frictional resistance is small, can be hot-melt butt joint.
5. MPP tube long-term use temperature-5 ~ 70 ºC.
6. Construction instructions:
    1) It is strictly forbidden to drop, hit, scratch, or expose to the sun during the transportation and construction of pipes.
     2) The axis of the two pipes must be aligned during the hot-melt butt joint, and the end face cutting should be vertical and flat.
     3) The processing temperature, time, pressure, and climate conditions are adjusted accordingly.
     4) The minimum bending radius of the pipe should be ≥75 pipe outer diameter.
 

FAQ

Q1:Are we factories or traders?
A: We are a factory with many years of production experience and participated in a large number of domestic engineering construction projects.

Q2:Why less inventory products?
A:Because we schedule production according to orders, there is less inventory backlog.Only a small amount of inventory is left to meet urgent customers in the city.

Q3:Can I ask for adding another color masterbatch?
A: Yes, you can. We can use the color masterbatch according to the requirements of customers.

Q4:What is your payment terms?
A: We often use TT, LC or other payment terms is also fine.

Q5:What are the main application field of products?
A: Mpp power pipe is suitable for more than 10KV high voltage transmission wire and cable pipe, plastic pipe. It is also widely used in the area of Telecommunication pipe, Gas pipe, Water supply pipe and Heating pipe.

Q6:Can we ask about your domestic partners or projects?
A: Yes.The companies we have cooperated with are: State Grid e-commerce Technology Co., LTD., Shandong New Era Pharmaceutical Co., LTD., Huantai Wanquan Water Supply Co., LTD., Qingdao Chengyang Urban construction Electromechanical Co., LTD., Qingdao Xinhong Shengshi Construction Co., LTD., Shandong Zhongkun Intelligent Technology Co., LTD., Caixin Construction Group Co., LTD., China Construction Eighth Bureau First Construction Co., LTD., China Communications First Public Bureau, Shandong high-speed Material Technology Limited company and many other companies to reach long-term cooperative relations.

Project site photos

 

Relational production