Customization: | Available |
---|---|
After-sales Service: | Available |
Warranty: | The Using Life Should Be 50 Years. |
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
PE gas pipe is made of polyethylene or HDPE mixed ingredients. Under the premise of ensuring the quality of the project, the use of it to establish a gas pipe network system can prevent the corrosion of steel pipes and cast iron pipes and joint leakage problems from the source. The PE gas pipe is made of inert material, which can resist the erosion of various chemical media. The friction coefficient of the pipe wall is low, the flow resistance is small, and the conveying capacity is strong. The electric hot melt connection is adopted, the interface strength is higher than the pipe body, and the elongation at break of high toughness PE is generally more than 500%. Resistance to slow crack growth (SCG), fast crack growth (RCP), flexibility and scratch resistance.
The implementation standard isGB/T15558.1-2015.
Transportation: no scratches, throwing, violent impact, oil and chemical pollution.
Construction: When heating, tube wall thickness ×9-10 seconds. The cooling time is three times the heating time. It should be putting into use after the pressure test is fine.
PE 100 gas pipe | ||||||||
Pressure Rating | 0.4MPa | 0.5MPa | 0.6MPa | 0.8MPa | 1.0MPa | 1.25MPa | 1.6MPa | 2.0MPa |
Outside Diameter (millimeter) | PN4 | PN5 | PN6 | PN8 | PN10 | PN12.5 | PN16 | PN20 |
SDR41 | SDR33 | SDR26 | SDR21 | SDR17 | SDR13.6 | SDR11 | SDR9 | |
Wall Thickness (millimeter) | ||||||||
16 | - | - | - | - | - | - | - | 2.3 |
20 | - | - | - | - | - | - | 2.3 | 2.3 |
25 | - | - | - | - | - | 2.3 | 2.3 | 3.0 |
32 | - | - | - | - | 2.3 | 2.4 | 3.0 | 3.6 |
40 | - | - | - | 2.3 | 2.4 | 3.0 | 3.7 | 4.5 |
50 | - | - | 2.3 | 2.4 | 3.0 | 3.7 | 4.6 | 5.6 |
63 | - | - | 2.5 | 3.0 | 3.8 | 4.7 | 5.8 | 7.1 |
75 | - | - | 2.9 | 3.6 | 4.5 | 5.6 | 6.8 | 8.4 |
90 | - | - | 3.5 | 4.3 | 5.4 | 6.7 | 8.2 | 10.1 |
110 | - | - | 4.2 | 5.3 | 6.6 | 8.1 | 10.0 | 12.3 |
125 | - | - | 4.8 | 6.0 | 7.4 | 9.2 | 11.4 | 14 |
140 | - | - | 5.4 | 6.7 | 8.3 | 10.3 | 12.7 | 15.7 |
160 | - | - | 6.2 | 7.7 | 9.5 | 11.8 | 14.6 | 17.9 |
180 | - | - | 6.9 | 8.6 | 10.7 | 13.3 | 16.4 | 20.1 |
200 | - | - | 7.7 | 9.6 | 11.9 | 14.7 | 18.2 | 22.4 |
225 | - | - | 8.6 | 10.8 | 13.4 | 16.6 | 20.5 | 25.2 |
250 | - | - | 9.6 | 11.9 | 14.8 | 18.4 | 22.7 | 27.9 |
280 | - | - | 10.7 | 13.4 | 16.6 | 20.6 | 25.4 | 31.3 |
315 | 7.7 | 9.7 | 12.1 | 15.0 | 18.7 | 23.2 | 28.6 | 35.2 |
355 | 8.7 | 10.9 | 13.6 | 16.9 | 21.1 | 26.1 | 32.2 | 39.7 |
400 | 9.8 | 12.3 | 15.3 | 19.1 | 23.7 | 29.4 | 36.3 | 44.7 |
450 | 11.0 | 13.8 | 17.2 | 21.5 | 26.7 | 33.1 | 40.9 | 50.3 |
500 | 12.3 | 15.3 | 19.1 | 23.9 | 29.7 | 36.8 | 45.4 | 55.8 |
560 | 13.7 | 17.2 | 21.4 | 26.7 | 33.2 | 41.2 | 50.8 | 62.5 |
630 | 15.4 | 19.3 | 24.1 | 30.0 | 37.4 | 46.3 | 57.2 | 70.3 |
710 | 17.4 | 21.8 | 27.2 | 33.9 | 42.1 | 52.2 | 64.5 | 79.3 |
800 | 19.6 | 24.5 | 30.6 | 38.1 | 47.4 | 58.8 | 72.6 | 89.3 |
900 | 22.0 | 27.6 | 34.4 | 42.9 | 53.3 | 66.2 | 81.7 | - |
1000 | 24.5 | 30.6 | 38.2 | 47.7 | 59.3 | 72.5 | 90.2 | - |
1200 | 29.4 | 36.7 | 45.9 | 57.2 | 70.6 | 88.2 | - | - |
Note:
1. This series of pipes are mainly used in urban water supply engineering. The nominal pressure refers to the maximum allowable working pressure of the pipe conveying water at 20ºC.
2. The weight of the above table is calculated according to the average density of 0.95g/cm³, and the outer diameter and wall thickness are taken as the nominal value plus half of the limit deviation.
We has passed ISO9001:2015 quality management system certification, ISO14001:2015 environmental management system certification, ISO45001:2018 Occupational health and safety management system certification. In addition, we qualify the member cooperation unit with the State Grid Corporation of China and signed a long-term supply contract with the State Grid of China.
PE gas pipe to the uneven settlement of the pipe base is very strong adaptability, wear resistance, fully in line with the national "GB/T15558.1-2015" standard. It can adopt a variety of trenchless methods, which greatly facilitates the construction and installation of the work. The system cost is low, the maintenance cost is less, and the project cost can be greatly reduced.
Application field
The buried polyethylene (PE) pipeline for gas is suitable for the buried urban gas pipeline system with the working temperature of -20-40ºC and the maximum allowable working pressure of no more than 0.7MPa. Types of gas suitable for transport:
1, nat gas: such as pure nat gas, oil associated gas, mine gas, etc.;
2, artificial gas: such as coke oven gas, water gas, oil gas, blast furnace gas, etc.;
3. Liquefied petroleum gas;
4. CH4 gas.
Product performance
1. Reliable connection
The strength of the joint is higher than the strength of the pipe body.
2. Good stress cracking resistance
PE gas pipe has low notch sensitivity, high shear strength and excellent scratch resistance, and excellent environmental stress cracking resistance.
3. Aging resistance, long service life
The additives in PE gas pipes prevent damage caused by UV radiation.
4. Good impact resistance at low temperature
Even in winter construction, the pipe will not be brittle.
5. Convenient transportation
PE gas pipe is lighter than concrete pipe, galvanized pipe and steel pipe, and it is easy to handle and install, which is conducive to saving manpower and equipment needs, which will reduce the cost of engineering.
6. Good wear resistance
The wear resistance comparison between PE gas pipe and steel pipe shows that the wear resistance of HDPE pipe is 4 times that of steel pipe. HDPE pipes have a longer service life and better economy.
OUR SAMPLES